Foxtel Deploys TAG Solution For All IP Monitoring Requirements

In 2020 Foxtel started a project to exit the aging television centre facility at Macquarie Park. The plan involved migrating their entire technology platform across two sites in Sydney to an all-IP platform encompassing video routing, satellite, OTT and more.

After more than 12 months of market research, testing and trialling various vendor IP monitoring solutions, Foxtel chose a TAG solution for all their IP monitoring requirements. This TAG monitoring solution, supplied by Magna Systems & Engineering, is thought to be the largest solution of its kind in the southern hemisphere and in the top ten solutions of its kind globally.

Starting with an RFI in 2020, progressing to an extensive RFP in 2021 and followed by a POC, the TAG solution ticked all the boxes for Foxtel’s new multiviewing and monitoring for all of their IP sources across multiple sites.

The TAG solution is now monitoring over 2,000 sources across multiple sites with all types of IP signals including uncompressed HD and UHD, compressed HD and UHD, OTT - HLS, CMAF and DASH including DRM, NDI and any combination of these signals can be monitored on just one server. TAG is also a software solution running entirely on COTS hardware.

When the RFP was concluded Foxtel also opted for the latest DELL R650 server with dual ConnectX6 200GE cards. Each server is capable of monitoring up to 128 uncompressed SMPTE ST2110 HD inputs with -7 seamless switching protection.

The new TAG IP solution is used across the entire Foxtel platform, from the ingest of the signal from playout or third parties, pre-compression and post compression. It is also used across multiple departments including MCR, Presentation and Foxtel’s Service Assurance teams across two sites under one control environment.  A great example is how Foxtel use the TAG solution comes in the form of the monitoring of their event-based OTT streams. Using the fully open API Foxtel have integrated this into their resource scheduling platform to provide operators with verification of customer delivery. Foxtel’s automation system, in turn, then supplies TAG with the necessary CDN details associated with an event to start decoding and probing. This now means that the once cumbersome workflows of checking a physical device for the event start are no longer required as there is now a continued monitoring of the stream from start to finish.

You might also like...

Playout & Transmission Technology At NAB 2024

As we approach the 2024 NAB Show we take a look at some of the discussion points and new playout & transmission technologies that will be available for investigation on the show floor.

NAB Show 2024 BEIT Sessions Part 2: New Broadcast Technologies

The most tightly focused and fresh technical information for TV engineers at the NAB Show will be analyzed, discussed, and explained during the four days of BEIT sessions. It’s the best opportunity on Earth to learn from and question i…

Standards: Part 6 - About The ISO 14496 – MPEG-4 Standard

This article describes the various parts of the MPEG-4 standard and discusses how it is much more than a video codec. MPEG-4 describes a sophisticated interactive multimedia platform for deployment on digital TV and the Internet.

Chris Brown Discusses The Themes Of The 2024 NAB Show

The Broadcast Bridge sat down with Chris Brown, executive vice president and managing director, NAB Global Connections and Events to discuss this year’s gathering April 13-17 (show floor open April 14-17) and how the industry looks to the show e…

5G Broadcast: Part 6 - Technical Dive Into 5G Broadcast & New 3GPP Standards

Standards bodies and mobile technology developers are putting the finishing touches to 5G Multicast and Broadcast. These include enabling seamless switching between unicast and multicast, and equally transparent roaming for users as they move between mobile cells. There is also…