Steadimate-RS Transforms The DJI Ronin Into A Body-Worn Stabilizer

Steadimate-RS for Ronin RS2, RS3 & RS3 Pro converts the handheld motorized gimbal to a body-worn Steadicam.

The new Steadimate-RS is the 3rd generation of the Steadimate lineup, designed to improve the functionality and user experience of operating Ronin RS2, RS3 and RS3 Pro motorized gimbal stabilizers. Designed in Burbank, CA by the same engineering team behind the Steadicam M-Series stabilizers and Volt technology, this new system enhances the capabilities of DJI's handheld motorized gimbal by refining the camera stabilization and improving operator comfort to offer a uniquely fluid movement that is reminiscent of a traditional Steadicam sled.

Steadimate-RS converts the handheld motorized gimbal into a full body-worn stabilizer by attaching a new mechanical gimbal and pan bearing to the 1/4"-20 mounting holes of the Ronin Series Accessory NATO Ports, along with a weighted gimbal post extension with fine tune balance adjustment. The system is completed with the choice of a spring arm and vest combination, available in either 15-lb./6.8 kg or 30-lb./13.6 kg load capacity.

The mechanical gimbal yoke features a new ball-bearing design to deliver full pan capability while providing assisted X and Y-axis stabilization. Addition of the Steadicam arm and vest reduces vertical bounce often seen in walking shots, by providing stabilization of the Z-axis while reducing operator fatigue and enabling longer shot duration by transferring the payload across the torso and hips. Together, this 3-axis manual stabilization and weight redistribution greatly expands the capability of the Ronin to greatly improve the fluidity of camera movement. The system also enhances the vertical range of motion by offering Low Mode capability. Operators can quickly and easily invert the motorized gimbal for a low angle perspective without any hardware reconfiguration. This allows the camera to transition from ground to eye-level and back again seamlessly.

The Steadimate-RS gimbal collar/yoke and weighted base (SDMRS-GIM) is available separately to use with an operator's existing 1/2" post Steadicam. Kits are also available complete with an Arm and Vest. For weight loads up to 15-lb./6.8 kg there's the SDMRS-A15VKwhich pairs Steadimate-RS with the A15 Arm and Aero Vest. For 30-lb./13.6 kg capacity, the SDMRS-A30VK includes an A30 Arm and Zephyr Vest. 

You might also like...

System Showcase: Delivering 175 Camera Production For The Repco Supercars ‘Bathurst 1000’

The Bathurst 1000 is a massive production by anybody’s standards, with 175 cameras, 10 OB’s, 250 crew and 31 miles of fiber cable. Here is how the team at Gravity Media Australia pull it off.

A Board’s Eye View Of The Future Of US Broadcast

It’s difficult for local stations generally focused on earning positive numbers during the next sweeps to invest much time contemplating station technology needs five to ten years out. This story explores what new direction TV broadcasting could go, from t…

Designing IP Broadcast Systems: System Glue

When we think of glue in broadcast infrastructures, we tend to think of the interface equipment that connects different protocols and systems together. However, IP infrastructures add another level of complexity to our concept of glue.

Standards: Part 3 - Standards For Video Coding

This article gives an overview of the various codec specifications currently in use. ISO and non-ISO standards will be covered alongside SMPTE 2110 elements to contextualize all the different video coding standard alternatives and their comparative efficiency - all of which…

Super Bowl LVIII Set To Impress

This years’ Super Bowl LVIII live telecast on CBS Sports will be mainly supported by broadcast and media services company NEP, which is sending more than a dozen mobile production units and support rigs on site at Allegiant Stadium in L…