Green Chips: Meaning efficient semiconductors

Ever heard of a “Green Chip”? They represent a line of energy efficient semiconductors made by NXP, all targeted at reducing the power consumption of electronics products.

GreenChip is a technology brand of Philips Semiconductors (now NXP Semiconductors) and is used in the company’s range of power adapter ICs with the same name. GreenChip ICs are used in power adapters and power supplies, as well as CFL bulbs and LED lighting products.

A recent NXP innovation is their GreenChip TEA1708 – an automatic discharge IC for X capacitors. The chip is used in power supplies.

Power supplies have traditionally relied on resistive discharge for X capacitors, which are used to reduce EMI (electromagnetic interference). By automatically discharging the X capacitor when the power supply is disconnected from the mains, the TEA1708 reduces power consumption by 20 – 30 mW, compared to using resistive discharge.

In addition to the automatic discharge functionality, the TEA1708 integrates a 500V clamping circuit, protecting the IC during mains surges and making the device more rugged. No additional metal-oxide varistor (MOV) is required to protect the TEA1708.

The TEA SSL4120T power supply controller

The TEA SSL4120T power supply controller

In a typical application with only two 200 kΩ resistors, the maximum differential mode mains surge voltage allowed exceeds 6 kV. The breakthrough reduction in power consumption achieved by the TEA1708 – combined with its ruggedness in withstanding power surges – make it a compelling solution for power supply manufacturers aiming to comply with new regulatory requirements such as Version 5 of the Code of Conduct for External Power Supplies and the amended ErP Lot 6, both introduced by the European Commission earlier this year.

“Power supply manufacturers face the ongoing challenge of stricter regulations on energy consumption at low load and no-load standby power. Every milliwatt of power savings counts, and this chip has only 1 mW of power consumption, which provides an important alternative to using resistors in discharging X capacitors,” said Marcel van Roosmalen, general manager, product line power solutions, NXP Semiconductors.

Saving a few milliamps in a 20KW transmitter probably won’t make much difference in overall product efficiency. However, save 30mW in every power supply mounted in a few dozen racks does add up, add to that GreenChip-type LED lighting.

With the increasing emphasis on ‘green’, everyone, including chip makers will search for ways to get as much power and performance out of products, with as little power required in as possible.

You might also like...

The Big Guide To OTT: Part 10 - Monetization & ROI

Part 10 of The Big Guide To OTT features four articles which tackle the key topic of how to monetize OTT content. The articles discuss addressable advertising, (re)bundling, sports fan engagement and content piracy.

Next-Gen 5G Contribution: Part 2 - MEC & The Disruptive Potential Of 5G

The migration of the core network functionality of 5G to virtualized or cloud-native infrastructure opens up new capabilities like MEC which have the potential to disrupt current approaches to remote production contribution networks.

Standards: Part 8 - Standards For Designing & Building DAM Workflows

This article is all about content/asset management systems and their workflow. Most broadcasters will invest in a proprietary vendor solution. This article is designed to foster a better understanding of how such systems work, and offers some alternate thinking…

Designing IP Broadcast Systems: Addressing & Packet Delivery

How layer-3 and layer-2 addresses work together to deliver data link layer packets and frames across networks to improve efficiency and reduce congestion.

The Business Cost Of Poor Streaming Quality

Poor quality streaming loses viewers at an alarming rate especially when we consider the unintended consequences of poor error reporting on streaming players.