GatesAir Amplifies Multichannel DAB Transmission Series

GatesAir, a Thomson Broadcast subsidiary dedicated to wireless content delivery, enters its second century in business with new over-the-air broadcast innovations on the horizon for NAB Show 2023.

The second generation of GatesAir’s Maxiva MultiD series of multichannel DAB/DAB+ radio transmitters is first out of the gate, unleashing new benefits such as improved power and bandwidth management, connectivity, and monitoring and control functionality.

The MultiD Series comes from the clever engineering minds of the GatesAir Europe team, which developed the series to reduce the costs and infrastructure of per-site multichannel DAB broadcasting. The original MultiD system integrates three separate transmitters within a single 1RU chassis, instead of requiring a separate transmitter for each channel plus an external combiner and auxiliary hardware. In addition to exceptional space savings, MultiD introduced new efficiencies to DAB broadcasters through independent service inputs and signal processing engines, and a single modulator for three DAB radio services within a single channel band (10A, 10B and 10C, for example).

These and other benefits, including adjustable RF power for each transmitter, carry over to second-generation MultiD systems with remarkable improvements. The new MultiD system design adds capacity for a fourth DAB service, and removes the limitations of broadcasting all services within a single DAB channel band. This means that MultiD customers can now broadcast four independent DAB radio services across separate channels (such as 10A, 10B, 11A and 11B). This is useful for broadcasters that were not allocated all licenses within a certain channel, for example.

Power output per channel can also now be built to each customer’s specifications. The original MultiD system capped at 150 W, which limited users three DAB services at 50 Watts apiece. The new modular design establishes an entirely new playbook: For example, DAB broadcasters can now order a 1.5 kW MultiD system to support three 500 W services, or a 1.2 kW system to support four 300 W services. It is also possible to establish varied power levels across different DAB services. With such exceptional power output flexibility, MultiD systems are now configurable to serve virtually any combination of power levels for up to four DAB services. The ability to divide system capacity is also useful for MultiD systems that share different tenants – a common occurrence in road tunnels where broadcasters can effectively consolidate resources to ensure consistent coverage of their most important broadcasts.

MultiD’s multicarrier architecture provides the same high-efficiency benefits even when supporting more than one tenant or broadcasting across more than one DAB channel. That includes a sizeable footprint reduction by removing the need for external RF combining. MultiD internally combines low-level RF signals, and then generates and re-transmits all independent DAB services through a single amplifier. The streamlined architecture requires only a single band-pass filter and RF antenna connector for transmission to listeners.

The architecture can be further streamlined through advanced IP networking capabilities and single-cable connections. The new MultiD system designs incorporate four separate EDI inputs for IP contribution and distribution. Users can select between IP-based (EDI) and legacy (ETI) connections, providing flexibility to transport signals using both IP and microwave connections. GatesAir has also added a secure HTML5 user interface to remotely monitor and analyze signal health and performance from any browser.

You might also like...

NAB Show 2024 BEIT Sessions Part 2: New Broadcast Technologies

The most tightly focused and fresh technical information for TV engineers at the NAB Show will be analyzed, discussed, and explained during the four days of BEIT sessions. It’s the best opportunity on Earth to learn from and question i…

Chris Brown Discusses The Themes Of The 2024 NAB Show

The Broadcast Bridge sat down with Chris Brown, executive vice president and managing director, NAB Global Connections and Events to discuss this year’s gathering April 13-17 (show floor open April 14-17) and how the industry looks to the show e…

NAB Show 2024 BEIT Sessions Part 1: ATSC 3.0 And TV RF

A full-time chief engineer in good relationships with manufacturer reps and an honest local dealer should spend most of their NAB Show time immersed in BEIT sessions. It’s an incredible opportunity to learn from and personally question indisputable industry e…

5G Broadcast: Part 6 - Technical Dive Into 5G Broadcast & New 3GPP Standards

Standards bodies and mobile technology developers are putting the finishing touches to 5G Multicast and Broadcast. These include enabling seamless switching between unicast and multicast, and equally transparent roaming for users as they move between mobile cells. There is also…

5G Broadcast: Part 5 - 5G Contribution & Remote Production

The main focus of this series is on the potential impact of 5G Broadcast on content delivery, here we take a look at how this might combine with 5G contribution to form a 5G transport ecosystem.