‘Real World IP’ Event Video Series: Part 1 – Introduction – Tony Orme

In Part 1 of our series of full length videos from our one-day Real World IP seminar, hosted by The Broadcast Bridge and held at BAFTA in London, Tony Orme, Editor of The Broadcast Bridge, introduces the problem broadcast IP infrastructures solve, that is, to improve flexibility and scalability, resulting in reduced costs and improved workflows.

Orme introduces SMPTE’s ST2110 and explains how it abstracts away the video, audio, and metadata from the underlying transport stream and in doing so re-invents the essence timing relationship.

By using PTP, each video frame, audio sample group, and frame accurate metadata packet can be individually stamped to facilitate flexible processing and synchronization of the essence streams throughout the workflow.

Watch the video; HERE.

Note you need to be logged in to access this video.

You might also like...

Electricity: Part 6 - Introducing Batteries

One cannot get very far with electricity without the topic of batteries arising. Broadcasters in particular have become heavily dependent on batteries to power portable equipment such as cameras and lights.

The Sponsors Perspective: Proactively Monitor IP Video Networks & Essences With Inspect 2110 & PRISM

For over two decades Telestream has streamlined the ingest, production, and distribution of digital video and audio. Today, compared to its SDI/AES-based predecessors, IP video adds exciting new challenges to these workflows.

Flexible Contribution Over IP - Part 1

IP connectivity delivers flexibility and scalability but making the theory work often requires integrated solutions that are adaptable, open, and promote interconnectivity.

Information: Part 6 - Loudspeakers

Information theory can also be applied to loudspeakers, which are among the most difficult of transducers to design. Measuring the information capacity of loudspeakers is a useful tool.

Building An IP Studio: Connecting Cameras - Part 4 - Software Defined Networks

In the previous article in this series, we looked at layer-2 switching and layer-3 routing. In this article, we look at Software Defined Networks and why they are so appealing to broadcasters.