Sennheiser Debuts Link Density Mode To Help Wireless Mics In Congested Spectrum 

In the face of ever shrinking UHF spectrum for wireless microphones, Sennheiser is launching a “Link Density Mode” for its Digital 6000 wireless microphone series. The new mode significantly increases the number of links that can be operated in congested RF environments.

While the standard Long Range Mode of Sennheiser's Digital 6000 operates with a 400 kHz channel spacing to ensure best audio and RF performance, the LD Mode uses half of the spacing, i.e. 200 kHz. This means that up to 40 links can be accommodated in an 8-MHz TV channel in Europe, and up to 30 links in the smaller 6-MHz TV channel in the USA.

The new Link Density Mode for Digital 6000 will help users to circumvent the most pressing spectrum issues they face in their daily work: They are now able to increase the number of channels within a given frequency window by accepting slight trade-offs in the audio frequency response and RF range.

Behind the LD Mode is the Sennheiser Performance Audio Codec (SePAC) which has been designed to strike a new balance between channel count on one hand and RF and audio performance on the other.

“Virtually everywhere the world over, production companies, theatres and touring artists and their engineers have lost more UHF spectrum than can be compensated for,” said Tom Vollmers, manager for the professional portfolio at Sennheiser. “With the Link Density Mode for Digital 6000, we are providing greater leeway to professionals while continuing our joint efforts to secure frequency spectrum that is so urgently needed for productions.”

The new LD Mode will be made available free of charge via a firmware update. It can be used with all existing Digital 6000 systems in the market except for the EK 6042 camera receiver, which will not support LD Mode. 

You might also like...

Essential Guide: Flexible IP Monitoring

Video, audio and metadata monitoring in the IP domain requires different parameter checking than is typically available from the mainstream monitoring tools found in IT. The contents of the data payload are less predictable and packet distribution more tightly defined…

Improving Comms With 5GHz - Part 2

This is the second instalment of our extended article exploring the use of the 5GHz spectrum for Comms.

Digital Audio: Part 10 - Adjusting Levels

Gain control in digital audio is essentially a numerical model of the same process in the analog domain.

Improving Comms With 5GHz - Part 1

As broadcasters strive for more and more unique content, live events are growing in popularity. Consequently, productions are increasing in complexity resulting in an ever-expanding number of production staff all needing access to high quality communications. Wireless intercom systems are…

ATSC 3.0: Right Place, Right Time

Many people and cultures celebrate special New Year dates. Organizations designate fiscal years. Broadcasters traditionally mark their new technology year mid-April, at annual NAB Shows. Old habits die hard.