Lawo Digital Audio Technology Sounding Good At TVRI Jakarta

Indonesia’s state broadcaster TVRI has completed a digital audio migration project at its Jakarta headquarters. TVRI Jakarta chose including two Lawo mc²56 MKII broadcast and production mixing consoles for this major upgrade.

Identical Lawo mixing desks have been installed in the control room and the auditorium FOH, each equipped with 48 faders and a stagebox with 48 mic/line inputs, eight line in and 16 line out. Installation was completed by the end of December 2014, with final testing and customization, and training for technical and sound engineers undertaken in January 2015.

Many of the console operators were initially apprehensive about the project, as this was their first use of digital audio technology. However, due to the easy setup and intuitive operation, as well as greater efficiency and flexibility of workflows, it did not take long for them to master the new production procedures.

The mc²56 console is available in five different frame sizes: for example, 16 faders for smaller outside broadcast vehicles or 80 faders for more complex challenges. The mixing console features a central control section with easy-to-reach user-buttons, large trackball buttons, a touchscreen in the central GUI, and illuminated rotary knobs—making the console very intuitive to operate.

TVRI operates 22 regional stations and has more than 6,800 employees, 2,000 of whom are based in Jakarta. Along with government digital television, TVRI also has four channels that are currently broadcast in DVB-T. TVRI 1 (on-air identity as TVRI Nasional) provides national coverage, TVRI 2 will be the regional network of regional TVRI broadcasters (currently broadcasts the Jakarta regional station), TVRI 3 with programs focused on culture and TVRI 4 with sports programming.

You might also like...

A Practical Guide To RF In Broadcast: Transmitter Plant Planning

Broadcast transmitter facility planning, design and construction… and what an engineering consultant can help with.

Audio For Broadcast: I/O & Recording Devices

We explore the basics of physical connectivity & signal management encountered in broadcast audio systems alongside the destination recording devices.

A Practical Guide To RF In Broadcast :  Part 3 - Planning, Tuning & Monitoring

This is the third of a multi-part series exploring the science and practical applications of RF technology in broadcast. Here we focus on things to consider when planning systems, how to tune transmitters and monitoring requirements.

Audio At IBC 2023

Broadcast audio is going through a renaissance and in the battle for viewers every content provider is looking at how to increase output and improve content. While the headlines might look familiar, IBC’s audio exhibitors are responding to these n…

Production Control Room Technology At IBC 2023

At the 2023 IBC Show flexibility and streamlined workflows will be major themes with production switchers being asked to do more within the same panel real estate.