MuxLab to Showcase New IP-based Uncompressed SMPTE ST-211 Gateway Converter

MuxLab will showcase its new IP-based Uncompressed Gateway Converter for SDI as well as an expanded range of other drop-down solutions at IBC 2018.

The MuxLab's new 3G-SDI/ST2110 over IP Uncompressed Gateway Converter (model 500767) connects HD- and 3G-SDI sources and displays to a local 10G Ethernet network. The solution enables sending multiple video sources to multiple displays in nearly any combination. 

Users can install this system in the traditional point-to-point way in which one AV source is delivered to one display using CAT5e/6 cable from up to 30m in distance or by using duplex multimode fiber cable at up to 400m in distance. All methods of signal extension support uncompressed resolutions up to [email protected]

When riding on a IP infrastructure, the entire system can be accessed and controlled by MuxLab’s Pro Digital Network Controller (model 500811), which vastly simplifies the configuration of IP-based systems and gives complete access from any smartphone, tablet or third-party control system.

MuxLab will also present its new 12G-SDI Fiber Extender Kit; delivers 12G-SDI up to 10km over one single-mode fiber cable at all specified bit rates. Digital video is delivered instantly in the type of point-to-point video transmission most often used within television broadcasting and film studios.

Other products on show include:

The HDMI over IP Uncompressed Extender, 4K/60; connects one or many sources to one or many displays through a 10G Ethernet switch. Sources and displays can be easily added or removed for flexibility. Resolutions are supported up to [email protected] and each source and display can be connected to the switch from up to 100m away. Integrators can create virtual splitter and matrix configurations. Both transmitter and receiver provide a 1G Ethernet port that connects additional network devices.

HDMI Audio Extractor with Dolby & DTS Downmixer

HDMI Audio Extractor with Dolby & DTS Downmixer

The HDMI Audio Extractor with Dolby & DTS Downmixer; delivers HDMI 2.0 video at resolutions up to [email protected] (4:4:4) to a local display. Digital Audio is extracted and down-mixed to deliver two channel analog audio using RCA L/R jacks. It works with Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, DTS-HD Master Audio or LPCM up to 7.1 channels.

Let us know what you think…

Log-in or Register for free to post comments…

You might also like...

OTT - What and Where to Monitor – Part 3

In the last two articles in this series we looked at why we need to monitor in OTT. Then, through analysing a typical OTT distribution chain, we sought to understand where the technical points of demarcation and challenges arise. In…

NAB 2019 – Technology vs Consolidation

Giving his unique view on NAB2019, Gary Olson considers and scrutinizes the big moving trends of consolidations, and casts clarity on the cloud, ATSC 3.0, and AI.

Essential Guide: Immersive Audio Pt 2 - Immersive Audio Compatibility

Immersive audio has the great potential to transform our human listening experience, captivate our imagination, and inspire our inventiveness.

Why We Need OTT Monitoring – Part 2

In the previous article in this series, “Understanding OTT Systems”, we looked at the fundamental differences between unidirectional broadcast and OTT delivery. We investigated the complexity of OTT delivery and observed an insight into the multi-service provider silo culture. In thi…

Data Recording and Transmission: RF

In part 8 of the series “Data transmission and storage”, consultant John Watkinson looks at some of the intricacies of RF transmission.