IBC2018 Show Event Channel

Everything you need to know for the show and exhibitors.

Click here

Major Raycom Media Repack Order Announced by Dielectric

Dielectric is preparing to ship 29 broadband and single-channel antennas to support channel relocation and ready Raycom stations for future ATSC 3.0 broadcasting.

Dielectric recently announced that Raycom Media placed an order for 29 Dielectric UHF and VHF antennas, tunable RF filters and transmission line to facilitate channel changes for its stations affected by the spectrum repack. Raycom is a major TV station group based in Montgomery, AL that owns or provides services for 65 TV stations and two radio stations in 44 U.S. markets across 20 states. Together, these stations cover 16% of U.S. TV households

The antenna order includes several Dielectric TFU-WB wideband UHF arrays. The low-cost, side-mount, UHF broadband pylon antennas provide higher voltage handling, 75% less windload, lower overall weight, and greater cost-efficiency compared with UHF panel antennas. The Raycom order also includes TFU-G, TFU-E, TFU-J UHF arrays, as well as THV VHF arrays. Most arrays incorporate elliptical polarization for enhanced reception performance in ATSC 1.0, and in preparation for ATSC 3.0.

Ahead of schedule

Raycom Media stations assigned to the first or second phases will receive their new antennas in Q3 and Q4 of this year. For Raycom Media stations scheduled for later phases, Dielectric will have the antennas ready three to six months prior to their respective deadlines.

Since Dielectric’s TFU-WB antennas provide a higher voltage handling capability and higher peak to average power ratio (PAPR) than competing antennas, Raycom Media is also investing in technology that is capable of broadcasting in the next-generation, IP-based ATSC 3.0 broadcast standard. Post-transition, these antennas can be redeployed in Single Frequency Networks (SFN). In this configuration, several smaller transmitters operate in sync with the main transmitter signal to boost the signal across the coverage area.

The Raycom Media order also includes new Dielectric tunable RF filters; waveguide designed for exceptional power rating and air-cooled for operational efficiency along with multiple runs of rigid transmission line.

Unique antenna patterns

TV stations that are subject to the spectrum repack must relocate to their new channel assignments according to the FCC’s 39-month transition schedule. Cognizant of the time-constraints many broadcasters face throughout the repack process, Dielectric has modified its antenna design and manufacturing processes to ensure operational efficiency and accelerated delivery. Dielectric will ship the new antennas to Raycom Media tower sites between September 2017 and February 2020.

“As Dielectric antennas have been broadly installed across our station group, the company had records detailing our stations’ unique antenna patterns,” said Bob Thurber, director of engineering, Raycom Media. “This, along with the level of technical and commercial support we have received, made planning for the repack that much easier. We’re confident that Dielectric will facilitate our complex, multi-station transition and meet the demanding requirements of the spectrum repack.”

Jay Martin, Vice President of Sales for Dielectric, notes that the TFU-WB UHF arrays are especially attractive to broadcasters faced with the challenges and opportunities of channel relocations. With its broadband capability and robust power input of 60kW, the TFU-WB antenna can accommodate multiple channels simultaneously. Many of Raycom Media’s new antennas will serve as auxiliary or interim antennas that keep channels on the air until permanent antennas are in place. These same arrays will serve as standby arrays for future emergency needs.

“We’re extremely pleased that Raycom Media has again demonstrated faith and confidence in our products, service and support. Over many years, our two companies have developed a mutually rewarding relationship based on trust,” said Martin. “Our commitment to Raycom Media is to have their new antenna systems ready to go well before their transition deadlines and to exceed their expectations across all fronts.”

Let us know what you think…

Log-in or Register for free to post comments…

You might also like...

Video Over IP - Making It Work - Part 2

Timing is the most fundamental aspect of broadcast television. From the early days of tube cameras, to modern OLED displays, timing continues to play a crucial role for maintaining an optimal viewer experience. Picture stutter and breakup are just a…

Adding The Cloud As Traditional Broadcast Workflows Evolve

The Cloud itself is pretty simple, but for broadcasters, leveraging it can be complex. It isn’t that difficult technically, but Broadcast still straddles requirements that demand real time, high resolution, quick turnaround solutions; and this is coupled with the n…

Video Over IP - Making It Work - Part 1

For the first time in the history of live television we can now abstract away the video, audio, and metadata streams from the underlying hardware. This innovation presents unprecedented opportunities empowering broadcasters to deliver flexibility, scalability, and highly efficient workflows.

Essential Guide: A Brief History of IP

This Essential Guide, “A Brief History of IP,” is far more than a look back at internet protocol (IP) technology. Rather, author and technology consultant, Tony Orme has created a reference guide filled with the precise kind of information about IP …

Essential Guide:  Audio Over IP - Making It Work

Audio over IP (AoIP) has become one of the most important technologies to ever enter the media landscape. The protocol allows facilities to leverage today’s mature IP platforms for audio applications resulting in lower costs, faster installations, improved quality o…