Bexel Highlights RF And Wireless Experience at NAB

Bexel will showcase its 15+ years of expertise in RF and wireless system design, including frequency coordination, equipment selection, system design, integration, and training at this year’s NAB show.

Bexel will showcase the company's Managed Antenna System (MAS) line of products, which provide a reliable and scalable answer to those times when you need solid wide-area coverage from low-power wireless devices. Bexel's MAS solutions can extend the usefulness of transmitters and receivers for on-air talent cueing, on-air talent microphones, and crew communication at both live events and permanent installations. 

Bexel ESS system integration division provides RF design and installation that meet the new FCC spectrum rules. On display at NAB will be an example of Bexel's exclusive RF audio solution developed with Quantum5X.

The player and coach microphone solution is perfect for a variety of sports applications. The QT-5100 PlayerMic is a rubberized, flexible player microphone system weighing less than 2 ounces, it is only a third of an inch thick. The PlayerMic has been field-tested by the NBA and can be wirelessly controlled to adjust frequency, mic gain, RF power level, mode, and grouping.

Bexel QT-5100 PlayerMic

Bexel QT-5100 PlayerMic

Fiber-Optic Solutions

The need to accommodate 4K demands increased bandwidth and 12G support. The company's expert fiber technicians are equipped to design a custom fiber-optic infrastructure or an RF-over-fiber solution for a number of microphone, IFB, intercom, and microwave camera systems for any broadcast event.

At the 2017 NAB Show, Bexel will showcase its expertise with its newly built Fiber Mini Booth Kit, a solution for interfacing an announce booth with audio, video, intercom, and IFB equipment to connect with a mobile unit up to 3,000 feet away without signal degradation — all over six strands of single-mode "tactical" fiber-optic cabling. The Mini Booth Kit gives productions the ability to send and receive 12 bidirectional video paths (six each way), 16 audio paths, four IFB channels, and an optional Ethernet robotic camera interface.

Let us know what you think…

Log-in or Register for free to post comments…

You might also like...

Broadcast for IT - Part 1 - Introduction

In this series of articles, we will explain broadcasting for IT engineers. Television is an illusion, there are no moving pictures and todays broadcast formats are heavily dependent on the decisions engineers made in the 1930’s and 1940’s. Understanding broadcast vid…

DPP - The Live Explosion

Away from traditional broadcasting a revolution is happening. Live internet streaming is taking the world by storm with unprecedented viewing figures and improved accessibility for brands looking to reach better targeted audiences. The Live Explosion, hosted by the DPP in…

Your Guide to Understanding IP

See that hill up ahead? It’s not a hill, it’s Mt Everest and your job is to conquer that mountain. Rendered into familiar industry vernacular, you, video engineer, are charged with building an IT-centric facility. A SMPTE standard was…

Articles You May Have Missed – November 22, 2017

At the start of 2013, BCE at RTL City was a hole in Luxembourg’s ground. In less than four years the facility was on air broadcasting 35 different channels across Europe and Singapore. Costas Colombus is BCE’s Special Projects Manager and…

A Conversation with Up-and-Coming Audio Mixer Sean Prickett

In this interview, we meet Sean Prickett – a “young gun” audio mixer that’s making a name for himself on some of TV’s most high-profile live and audition shows. Most recently, Sean was A1 for the live-broadcast finals of the CBS r…