ATSC3Xpert receives, analyzes and transcodes in real-time and can capture content to a PCAP file.
DekTec will display and demonstrate its latest ATSC 3.0 ecosystem including test modulators, demodulators, and HEVC encoders and new 4K solutions at the 2017 NAB Show. Booth visitors can also pick up a copy of DecTec’s new ATSC 3.0 Primer.
DekTec will introduce the DTA-2174 HEVC encoder for PCI-express, which provides broadcast-quality encoding of up to 4Kp60 in a standard PC. The DTA-2174 PCIe card is perfectly suited for PC platform reception or playout of a 4K stream. The card has 4K Input/Output with Quad 3G-SDI bidirectional port.
DekTec will also display its VF-REC v3 solution for recording 4K baseband SDI using standard and affordable PC hardware. Click to enlarge.
ATSC 3.0 Toolset
As an active member of the ATSC 3.0 Validation & Verification group, DekTec is at the forefront of standard implementation and interoperability verification. This position has enabled DekTec to add virtually all features of the latest ATSC Physical Layer Protocol specification (A/322), including multi-PLP, multiple subframes, Layered Division Multiplexing (LDM) and Hybrid Time Interleaving (HTI) in the DekTec SDK.
The Multi-PLP Extensions, a subsystem of the DekTec SDK for creating multi-PLP modulators, has been extended with support for ATSC 3.0. A broadcaster's application only needs to pass modulation parameters and ATSC Link-layer Protocol (ALP) packets. The DekTec SDK handles packet scheduling, framing, FEC, interleaving and eventually waveform generation. This enables a broadcaster to build their own transmitter application without having to worry about the lower levels of the transmission.
The Advanced Demodulator API, another subsystem for receiving and analyzing RF modulated signals, has likewise been extended with ATSC 3.0. It uses the DTA-2131 universal VHF/UHF receiver card in combination with Software Defined Radio (SDR) technology. The user application can retrieve real-time information about the RF-signal, bootstrap- and layer-1 parameters. Multiple PLPs can be decoded simultaneously and passed to the user application as ALP packets.
Atsc3Xpress Analysis GUI displays a comprehensive overview of signaling data and outputs the demodulated stream over IP. Click to enlarge.
DekTec’s ATSC 3.0 applications
Atsc3Xpress is the test-signal generator for ATSC 3.0 transmission, receiver chip development, field trials and demonstrations. Its GUI allows full control over all ATSC 3.0 parameters. It supports playout from a built-in PRBS generator, IP-capture file (PCAP) and live IP-input carrying ROUTE/MMT packets. The DTC-305 option can be added to inject white noise and simulate reflections (multi-path fading).
Atsc3Xpert is DekTec's ATSC 3.0 receiver and analyzer. Its GUI provides a real-time overview of the RF measurements and ATSC 3.0 signaling parameters. It includes graphical representations of LDPC iterations, transfer functions, impulse response, and constellation. The demodulated stream can be captured to file or forwarded on IP.
You might also like...
Two years ago proponents of ATSC 3.0 began looking for a facility to host the testing of the country’s next-generation TV broadcasting standard. Similar to the early days of digital broadcasting—when the 8-VSB modulation scheme was being considered for use…
The Duchess of Windsor, the American wife of the man who was previously England’s King Edward VIII, famously said: “You can never be too rich or too thin”. If she’d lived in the 21st century, she might have added: …
ATSC 3.0 is slowly rolling out in the form of actual on-air tests at multiple sites. This type of launch provides engineers the perfect opportunity to use the time to better understand this complex technology before equipment purchase decisions must be…
A significant upstream cable modem DOCSYS analysis option was introduced at ANGACOM.
GatesAir StreamAssure solution supports multiple monitoring points at 26 transmitter sites and central headends in Ethiopia.