More ATSC 3.0 Standardization Steps Completed

The US-based Advanced Television Systems Committee standardized three more components of ATSC 3.0, the next-generation television system expected to transform the ability of broadcasters to deliver mobile, interactivity and higher quality content.

The Advanced Television Systems Committee (ATSC) members ratified the Link Layer Protocol and Audio and Video Watermark Emission standards to be part of the ATSC 3.0 suite of 20 standards and recommended practices. Three new Proposed Standards and two new Candidate Standards are also in progress within the technical subcommittee charged with developing and documenting ATSC 3.0.

The details

The Link Layer Protocol Standard (A/330) defines the layer between the physical layer and the network layer. The link layer transports the data from the network layer to the physical layer at the sending side and transports the data from the physical layer to the network layer at the receiving side. The ATSC Link-Layer Protocol also optimizes the proportion of useful data in the ATSC 3.0 Physical Layer, by means of efficient encapsulation and overhead reduction mechanisms for IP and MPEG-2 TS transport. Extensible “headroom” for future use is also provided.

The Audio Watermark Emission Standard (A/334) specifies the audio watermark encoding for use with systems conforming to the ATSC 3.0 family of specifications. This standard specifies the format in which the audio watermark resides in an uncompressed audio signal.

The Video Watermark Emission Standard (A/335) specifies the emission format for video watermarks used in ATSC 3.0 broadcasts. The video watermark technology provides the capability to robustly embed ancillary data in the transmitted pixels of a video signal. It provides a data path for its ancillary data payload that can readily survive changes in video compression data rate, transcoding to other video compression codecs, and delivery over legacy consumer HDMI interfaces.

More work in progress

ATSC Technology Group 3 (TG3) members have begun voting to elevate three ATSC Candidate Standards to Proposed Standard status (the final step before ATSC member approval).

The standards include the A/322 Service Announcement, which defines announcement of services in an ATSC 3.0 broadcast, A/333 Service Usage Reporting, which defines service usage reporting for ATSC 3.0; and A/343 Captions and Subtitles, which defines the required technology for closed caption and subtitle tracks over ROUTE-DASH and MPEG Media Transport.

TG3 members also are voting to elevate the A/360 Security draft document to Candidate Standard status. A/360 specifies the mechanisms for security and service protections in ATSC 3.0 systems. The A/324 Scheduler and Studio-to-Transmitter Link is now a Candidate Standard. Among other things, it specifies the interface protocol and operation parameters for Single Frequency Network transmitters.

You might also like...

NAB Show 2024 BEIT Sessions Part 2: New Broadcast Technologies

The most tightly focused and fresh technical information for TV engineers at the NAB Show will be analyzed, discussed, and explained during the four days of BEIT sessions. It’s the best opportunity on Earth to learn from and question i…

Standards: Part 6 - About The ISO 14496 – MPEG-4 Standard

This article describes the various parts of the MPEG-4 standard and discusses how it is much more than a video codec. MPEG-4 describes a sophisticated interactive multimedia platform for deployment on digital TV and the Internet.

Chris Brown Discusses The Themes Of The 2024 NAB Show

The Broadcast Bridge sat down with Chris Brown, executive vice president and managing director, NAB Global Connections and Events to discuss this year’s gathering April 13-17 (show floor open April 14-17) and how the industry looks to the show e…

NAB Show 2024 BEIT Sessions Part 1: ATSC 3.0 And TV RF

A full-time chief engineer in good relationships with manufacturer reps and an honest local dealer should spend most of their NAB Show time immersed in BEIT sessions. It’s an incredible opportunity to learn from and personally question indisputable industry e…

5G Broadcast: Part 6 - Technical Dive Into 5G Broadcast & New 3GPP Standards

Standards bodies and mobile technology developers are putting the finishing touches to 5G Multicast and Broadcast. These include enabling seamless switching between unicast and multicast, and equally transparent roaming for users as they move between mobile cells. There is also…