LEADER to Demonstrate QC for Live IP Production at IBC 2015

AV over IP is a main discussion topic at this years’ International Broadcasting Convention in Amsterdam, and LEADER Instruments Corporation is demonstrating its ability to support quality control for Sony’s IP Live Production system.

At IBC 2015, LEADER Instruments Corporation will spotlight LEADER’s FS 3103 software package which allows MXF audio/video media files to be processed quickly and efficiently. The FS3103 is capable of analyzing up to four MXF files simultaneously and reduces processing time for each file to one fifth of real time. MXF formats supported include Sony XDCAM and Panasonic P2.

Sony’s IP Live Production system provides an AV-over-IP interface that delivers low latency and noise-free switching of HD and 4K video, audio and metadata, as part of an IP-based network. The system packetizes video, audio and metadata, enabling real-time transmission between video-production products via standard network infrastructures. This technology further enhances Sony’s IP Live Production system by increasing efficiency and reducing cost for live studio broadcasts and sports production. LEADER is among 30 industry-leading companies who are assisting broadcasters in designing and implementing IP based infrastructures.

For SDI video QC, Leader will also be demonstrating its FS3102 software. It can perform real-time checking of up to four HD-SDI or SD-SDI signal streams. It is designed for use with an SDI to PC plug-in interface board such as the BlackMagic Design DeckLink.

A combined system incorporating an FS 3102 and FS 3103 can process up to four files simultaneously in permutations such as one file on FS 3102 and three files on FS 3103; two files on FS 3102 and two on FS 3103; three files on FS 3102 and one on FS 3103; all four files on FS 3102 with none on FS 3103, and so on.

Easy to install and operate, the Leader FS 3102 and FS 3103 provide automatic checking and analysis of image characteristics such as block noise, line noise, image skip, image freeze, edit point errors, lost source, and sequences likely to cause photosensitive epilepsy.

Audio tests include channel noise, timing errors, spurious transients, loudness and lost source. Audio can be analyzed as a waveform display. Out-of-specification events can be assigned to trigger alarms, greatly increasing the efficiency of live or file-based content monitoring.

The FS 3102 and FS 3103 will make their first European exhibition appearance on the LEADER stand (11.10A) at IBC 2015 in Amsterdam, September 11-15. LEADER representatives attending will include Hiro Sawa (President, LEADER Instruments Corporation), Richard Heath, Koichi Fukagawa, Kevin Salvidge, Christian Young and Koji Yano.

See LEADER Instruments Corporation on stand 11.A10 at IBC2015, Amsterdam, September 11-15.

You might also like...

The Sponsors Perspective: PRISM Waveform Monitors: Form Is Temporary, But Class Is Permanent?

In the beginning, there was television. And whenever people tried to make television programmes effective video signal monitoring was an essential pre-requisite.

Digital Audio: Part 12 - Sampling Rate Conversion

In real systems the issue of sampling rate conversion arises frequently but fortunately there are plenty of solutions.

Microphones: Part 2 - Design Principles

Successful microphones have been built working on a number of different principles. Those ideas will be looked at here.

Timing: Part 3 - Early Synchronization

Synchronizing became extremely important with the growth of AC power systems, which ended up being used to synchronize all sorts of equipment, from Radar to television.

Digital Audio: Part 11 - Digital Dither

It should constantly be borne in mind that although digital audio is a form of data, those data represent an audio waveform and there are therefore some constraints on what can and cannot be done to the data without causing…