Pliant Technologies Showcases New CrewCom Control Unit
Pliant Technologies features its new CCU-08 CrewCom Control Unit for the first time in the U.S. at NAB New York.
The CCU-08 is the latest addition to the CrewCom system and gives users the ability to use up to eight 4-Wire ports while retaining all the same features of the current companion CCU-22 and CCU-44 products.
Like the current Control Units, the CCU-08 Control Unit contains no radio and is frequency agnostic and can therefore control and monitor any device across CrewNet regardless of radio frequency bands being utilized. With the combination of CrewCom Radio Transceivers, the new CCU-08 supports up to 82 Radio Packs, 18 in Normal mode and 64 in the recently released High Density mode, across all RF bands.
The latest CrewCom firmware update includes support for the new CCU-08 as well as the recently released High Density mode feature, which will also be highlighted throughout the show. High Density mode is a selectable mode of operation that greatly increases user densities. The software-selectable mode supports up to 32 Radio Packs (RPs) on a single Radio Transceiver (RT) while dynamically allowing any four of the RPs to communicate in full-duplex across four available talk paths.
CrewCom is an innovative, professional wireless system featuring excellent voice quality with 4-conference or 2-conference full-duplex Radio Packs, Seamless Roaming, the highest density of users in the industry, and a host of user features. CrewCom is based on a versatile decentralized, highly scalable network platform. CrewCom wireless products easily put dependable RF coverage where needed.
You might also like...
Audio For Broadcast: I/O & Recording Devices
We explore the basics of physical connectivity & signal management encountered in broadcast audio systems alongside the destination recording devices.
Audio At IBC 2023
Broadcast audio is going through a renaissance and in the battle for viewers every content provider is looking at how to increase output and improve content. While the headlines might look familiar, IBC’s audio exhibitors are responding to these n…
Understanding IP Broadcast Production Networks: Part 14 - Delay Monitoring
We use buffers to reassemble asynchronous streams so we must measure how long individual packets take to reliably get to the receiver, and the maximum and minimum delay of all packets at the receiver.
Audio For Broadcast: Microphones Part 2 - Types Of Mic
Polar patterns play a big part in designing the sound for a programme, and they apply to all microphones. The next step is to ascertain what kind of microphone to use.
Audio For Broadcast: Microphones Part 1 - Polar Patterns
Here we look at microphone polar patterns and what to consider when planning how to capture sounds to create gripping broadcast content.