Fatman, from the writing/directing Nelms Brothers team and their long-time cinematographer Johnny Derango is not your typical heartwarming Christmas movie. This action-packed tale tells the story of a precocious 12-year-old who, after receiving a lump of coal in his stocking, hires a hitman (Walton Goggins) to take revenge on Santa Claus (Mel Gibson).
The script for this dark action comedy called for a series of fast-moving exterior scenes at the North Pole. The perfect location was the wilds of Western Canada, where extreme temperatures down to -35°F/-37.22°Cin the dead of winter are the norm. Key to making the pages safely was the cold-weather savvy local camera crew and their choice of equipment.
For DP Johnny Derango one important tool was Teradek’s wireless system, a staple on all four features he’s helmed for the Nelms Brothers. “It just works,” he says. “I get images on my monitors that run smoothly the entire time.”
“We used a Teradek Bolt Pro 3000 transmitter and receiver system for wireless video between the ARRI Alexa LF and Alexa Mini LF to my DIT cart,” recounts Digital Imaging Technician (DIT) Andrew Richardson. “From there we used a video router to distribute the video signal to Pomfort Livegrade via the Teradek COLR (LUT box) on the DIT cart and to the monitors.
“In addition to the Teradek units on the DIT cart, we had two SmallHD monitors which allowed additional exposure checks using the Spectrum mode in the Exposure Assist (False Colour) tool.” A long-time SmallHD user, Derango counts on SmallHD’s false color meter for exposure wherever he goes. “I love Sony OLEDs but I always take a pair of 702s or 703s with me for false color,” he says. “That’s the combination I am comfortable with and the results are great.”
They also used SmallHD 703 monitors on the Alexa rigs. “The SmallHD monitors even kept working with snow landing on them,” says Derango. “Despite the conditions, the wireless video range between the Teradek transmitters and receivers was quite impressive,” explains Richardson, “In some locations we were receiving video signal from upwards of 200 meters away, in -20°C/-4°F weather.”
On the back of the busy DIT cart was a WiFi access point and a compact rig of two Teradek Serv Pros that were supplied by the Set Dresser, Alex Kim. This solution transmits HD video over WiFi to iOS/Android devices. Richardson distributed video signals to each of the Serv Pros allowing Kim to watch the video feeds through the Teradek VUER app on his iPad Pro.
The team had a bit of a challenge at the film’s climax. “We did not have a wireless video transmitter for C-Camera so we had to hardwire with BNC cable,” 1st AC Chris Chung points out. “The camera was at max extension on a Genie lift and we had a lot of video issues from running hundreds of feet of BNC cable. When you get used to a reliable solid signal with Teradek you take for granted the convenience it affords.”
You might also like...
Planning for any kind of live TV broadcasting starts with a ‘what-if?’ list. What if the power source fails? What if a key production person gets sick or hurt? What if broadband internet access becomes unstable? What are the chances for…
Most live remote outside broadcasts are thoroughly planned by producers and directors who are often too busy to consider potential equipment problems. Technology is an engineering responsibility. Engineers must be ready for any circumstances that threaten to take the show…
Live TV production may not be the best fit for perfectionists who can’t recognize ‘good enough’ and move on. Live TV has no patience, no second chances and can never be late. Every live shot is a first impression.
NDI (Network Device Interface) is a free protocol for Video over IP, developed by NewTek. The key word is “free.”
For the past year an international group of technology companies, funded by the European Union (EU), has been looking into the use of 5G technology to streamline live and studio production in the hopes of distributing more content to (and…