With 959 repack antennas ordered and more than 930 shipped, Dielectric remains strong as it prepares for the future.
More than 200 high-power antennas and transmission lines in North America have been in operation for at least 30 years.
Dielectric is hard at work preparing for the next generation of over-the-air broadcast opportunities as the US spectrum repack marches toward conclusion. With Dielectric preparing its remaining shipments for Phase 10 – the final repack phase for higher power stations, the company reports an approximate 82 percent share of the total repack market, and a strong foundation to address emerging business opportunities.
“We have booked 959 repack or displaced antenna arrays in North America since we began taking repack orders, and have shipped more than 930 of those arrays over a 30-month period,” said Jay Martin, Vice President of Sales, Dielectric. “Upon adding in non-repack projects, we estimate that Dielectric will ship 1065 medium-to-high power antennas within that period in North America alone by the conclusion of repack.”
Much of this success has been due to Dielectric’s advance preparation for the busy repack period, which emphasized capacity throughout the organization. Dielectric established a manufacturing strategy across two facilities that focused on advance production, assembly and stocking of antennas and supporting RF systems. This ensured that Dielectric could not only reliably deliver orders across strict repack timelines, but also accommodate emergency requests and fill new orders unrelated to repack.
“Beyond antennas, we built 111 miles of transmission line, 1039 RF filters, and 101 multichannel combiners for TV alone,” said Martin. “We built 395 complete RF systems and we built many of these within days to address very short lead times. The volume of product we have manufactured and shipped has been astronomical. We’re applying similar advance preparation strategies as more NextGen TV opportunities surface. That will ensure we can properly address growing interest in our Powerlite low-power antenna systems for ATSC 3.0 SFNs, while also serving our other customers without delay.”
Martin anticipates a busy period ahead for replacement TV antennas worldwide, including more than 200 high-power antennas and transmission line runs in North America that have been in operation for at least 30 years. Dielectric’s existing RF portfolio, augmented by the ongoing development of antennas, filters and components, will ensure that these customers have access to the latest RF technology and manufacturing capacity to meet their technical and delivery needs. Dielectric’s recently introduced RFHAWKEYE for real-time monitoring of antenna feed systems will serve another critical business need moving forward, providing customers with previously unavailable status monitoring of these essential systems.
Keith Pelletier, Vice President and General Manager, Dielectric, adds that Dielectric’s focus on the launch of LPTV design tools will allow for quicker fulfillment of international TV orders, which largely operate lower power systems, in addition to serving NextGen TV and other domestic LPTV customers.
“We have added support for nearly 20 additional antenna patterns that apply to NextGen TV SFN systems and low-power TV systems worldwide, along with a comprehensive software toolset for consultants to enhance SFN coverage analysis and antenna configurations,” said Pelletier. “These advanced toolsets, along with maintaining our high-capacity manufacturing practices established during repack, ensures that Dielectric customers will be well-served for years to come.”
You might also like...
The first burst error correcting code was the Fire Code, which was once widely used on hard disk drives. Here we look at how it works and how it was used.
Need a live shot from inside an unmarked moving rental sedan during a thunderstorm? No problem.
Gamma is a topic that pervades almost all forms of image portrayal, including film, television and computers. Gamma has become a tradition, which means that its origins are not understood, and it is not questioned. Perhaps it is time that…
Program delivery to mobile devices and smart televisions has fueled the growth for internet delivery. But one of the challenges broadcasters and media content providers face is that the internet was never originally designed to stream large amounts of video…
There are two basic reasons to know the level of an audio signal. One of these is more technical and one of them is more subjective.