RTW’s TouchMonitor series now supports multiple audio networking protocols.
RTW has announced ST 2110 compatibility for its Dante- and Ravenna-compatible TouchMonitor TM7 and TM9 models.
The new TM-Dante and TM-Ravenna units are now available with ST 2110 functionality, and existing owners can add this option via a free firmware update.
“ST 2110 is the latest standard within Audio and Video over IP and we expect it to replace SDI solutions over time,” said Mike Kahsnitz, RTW Senior Director of Product Management. “SMPTE ST 2110 is a major contributing factor in the development toward a single IP-based mechanism for the professional broadcaster.”
He said that like SDI, the IP standard carries audio, as well as video and metadata, but unlike SDI, it is based on IP technology, which makes it a true network, rather than point-to-point.
“Broadcast is beginning to make a shift toward a truly networked infrastructure and we obviously want to continue developing our solutions accordingly,” Kahsnitz said. “These professional audio meters are now available for broadcasters and content providers adopting the new IP-based infrastructure.”
You might also like...
The IEEE has just published the latest version of its Precision Time Protocol (PTP) standard that provides precise synchronization of clocks in packet-based networked systems. This article explains the significance of IEEE 1588-2019, otherwise known as PTPv2.1, and how it…
It seems almost superfluous today to specify that audio is digital because most audio capture, production and distribution today is done numerically. This was not always the case and at one time audio was primarily done without the help of…
There is level and then there is loudness. Neither can be measured absolutely, but by adopting standardized approaches it is possible to have measurements that are useful.
There are two basic reasons to know the level of an audio signal. One of these is more technical and one of them is more subjective.
The traditional level standards were based on electrical signals of specified power. When these signals are recorded on media, or transmitted in other ways, these definitions no longer apply.