Focusrite’s RedNet Control 2.3 Application Delivers Red 4Pre, 8Pre &16Pre Line Control

Focusrite has released RedNet Control 2.3, a free update that unifies RedNet Control with configuration, status monitoring, metering and extended operational control of the Red 4Pre, Red 8Pre, Red 16Line.

Focusrite’s range of audio interfaces offers up to 64 in/64 out Thunderbolt I/O with Avid Pro Tools|HD and Dante network audio connectivity.

“Providing support for Thunderbolt control of the Red 4Pre, Red 8Pre and Red 16Line within RedNet Control negates the need for the separate Focusrite Control application,” said Will Hoult, Focusrite’s senior product manager. “At the same time, we decided to add a handful of new features that weren’t previously possible for the Red series.”

Focusrite RedNet Control’s “Device View” features a graphical representation of each device on the local network, giving feedback such as signal metering, clock status, power supply state and primary/secondary network connection state. RedNet Control is completely customizable, which allows for several users on the same network to have completely different views.

RedNet Control now also provides parameter control. This includes clock source selection, sample rate converter configuration and reference level setup.

All the functions of Red mic preamps can be controlled from the software including gain, phantom power, phase invert, high-pass filter and air mode. Graphical control for Red range units is separated into five pages: I/O control and metering, input routing, output routing, monitor control and custom mixes.

From the custom mixes page, RedNet Control’s internal audio mixer allows users to create up to eight separate mono or stereo sub-mix signals. Up to 30 of all the available inputs can be selected as sources for the mixer. Once selected, these input signals will then become available to all custom mixes. Each mixer output can have an individual balance of fader levels, mute and channel pan settings.

Where more hands-on control is required, RedNet Control features a MIDI bridge, allowing any programmable CC-based or SysEx MIDI controller to manage up to 16 different devices with mic pres. This allows gain to be easily mapped to an encoder for tactile control.

RedNet Control includes the option to use the Avid Pre CC protocol, meaning Red range devices can be controlled from Pro Tools and in turn with one of the Pro Tools controllers such as Artist series, S3 or S6.

Let us know what you think…

Log-in or Register for free to post comments…

You might also like...

Essential Guide: When to Virtualize IP

Moving to IP opens a whole plethora of options for broadcasters. Engineers often speak of the advantages of scalability and flexibility in IP systems. But IP systems take on many flavors, from on-prem to off-prem, private and public cloud. And…

Essential Guide:  Immersive Audio Primer – Part 1

Part one of this four-part series introduces immersive audio, the terminology used, the standards adopted, and the key principles that make it work.

What Makes a Podcast Studio Unique?

Currently, there are over 660,000 different podcasts produced throughout the world. Over 28 million episodes are available in more than 100 languages. More than 50 percent of U.S. homes listen to podcasts regularly and most listeners average seven different shows each week. For…

Using Portable Recorders to Make Recording Simple

Today, high quality audio recording may be achieved a multitude of ways, but using a low-cost portable recorder may be one of the simplest and best for non-technical users. Here are some tips.

Server-Based “At Home” Workflows Provide Efficiency For NASCAR Productions

NASCAR Productions, based in Charlotte NC, prides itself on maintaining one of the most technically advanced content creation organizations in the country. It’s responsible for providing content, graphics and other show elements to broadcasters (mainly Fox and NBC), as w…