Samsung has introduced the Samsung 970 PRO and EVO, the third generation of its consumer solid state drive (SSD) lineup. The company continues to push the performance barriers with SSDs built for the higher bandwidth for intensive workloads on workstations.
The Samsung 970 PRO and EVO are based on the M.2 form factor standard and with the latest PCIe Gen 3×4 lane interface. The 970 series maximizes the potential of NVMe bandwidth, delivering performance for processing large volumes of data, including 3D video, 4K graphics and video work, high-end games and data analytics.
The 970 PRO enables sequential read speed of up to 3,500 MB/s and sequential write speed of up to 2,700 MB/s1, while the EVO features sequential read speed of up to 3,500 MB/s and sequential write speed of up to 2,500 MB/s2.
The sequential write speeds represent an enhancement of up to 30 percent over the previous generation, thanks to Samsung’s latest V-NAND technology and the newly designed Phoenix controller. The 970 EVO, in particular, utilizes the Intelligent TurboWrite technology, which uses a large buffer size of up to 78GB to enable faster write speeds.
In addition to the advancements in performance levels, the 970 PRO and EVO deliver exceptional endurance and reliability. The Dynamic Thermal Guard technology safeguards against overheating by automatically monitoring and maintaining optimal operating temperatures, while a heat spreader and new nickel-coated controller further lower the SSD temperatures.
The 970 PRO and EVO also provide greater system design flexibility for the high-performance computing systems. Offering a variety of high capacity options in a compact M.2 form factor – including the single-sided 2TB EVO model – the 970 series enables convenient storage expansion across a wide range of computing devices.
The 970 EVO will be offered in 250GB, 500GB, 1TB and 2TB8 capacities, and the 970 PRO in 512GB and 1TB capacities. The 970 PRO and EVO will be available for purchase starting in May. Prices start at $329.99 and $119.99, respectively.
2. Performance may vary based on SSD’s firmware version, system hardware and configuration. Performance measurements based on IOmeter 1.1.0. Write performance measurements are based on Intelligent TurboWrite technology. The sequential write performances after TurboWrite region are: 300 MB/s(250GB), 600 MB/s(500GB), 1,200 MB/s(1TB) and 1,250 MB/s(2TB). The random write performances after TurboWrite region are: 80,000 IOPS(250GB), 160,000 IOPS(500GB) and 300,000 IOPS(1TB/2TB). * Test system configuration: Intel Core i7-7700K CPU @4.2GHz, DDR4 2400MHz 32GB, OS-Windows 10 Built 10240, Chipset–ASUS PRIME Z270-A.
You might also like...
When a company markets two products that seem similar, both targeting much the same task, but one costs significantly less, it’s reasonable to assume the less expensive product will offer significantly fewer features.
Philo T. Farnsworth was the original TV pioneer. When he transmitted the first picture from a camera to a receiver in another room in 1927, he exclaimed to technicians helping him, “There you are – electronic television!” What’s never been quoted but lik…
Spinning disk (HDD) and flash storage (SSD) drives are nearly the same cost these days, so it’s no surprise that broadcasters are turning increasingly to SSDs for long-term storage of our most critical media files. But did you know t…
Today, video and still cameras, tablets and even laptop computers often rely on memory cards for data storage. Each electronic device specifies a unique kind of memory and choosing the right card for the application can be challenging.
After twenty-five NAB shows I’ve developed a pattern of booths to visit each day. At NAB 2015 walking though a series of expensive C-series cameras in the Canon booth, I encountered a new species of video camera—the XC10. (Figure 1). It …