Broadcast TV’s future revealed:  ATSC 3.0 enables new business models

Consumers in the digital age are quick to adapt new media consumption habits as new media and methods of accessing it and interacting with it evolve. Every media technology must innovate and compete or become obsolete. For broadcast television, this challenge is practically existential. The broadcast model of one-to-many for television (and radio) dominated the second half of the 20th century. But the introduction of cable and satellite TV and the Internet enabled not only a direct one-on-one relationship between a media source and consumers but tailored personalized services and offerings that bolster “stickiness” or loyalty.

Madeleine Noland is Chair of the ATSC 3.0 Technology Group.

Madeleine Noland is Chair of the ATSC 3.0 Technology Group.

To keep pace, broadcast TV migrated to digital signals over the past 20 years, representing the first major technology shift since analog color TV was introduced in the 1950s. Digital broadcast TV offers improved, high-definition pictures, more realistic sound, more channels, and more choices.

But changes in media, how it is accessed and consumed, and consumer behavior continued to evolve at an increasingly rapid rate.

Consumer expectations, new platforms

Consumers, quick to adopt new media and ways to tap into it, have come to expect the ability to access sight-and-sound content from any source on any device, anywhere, anytime – whether that content is broadcast over-the-air, delivered via cable, satellite, phone lines or stored at home.

Digital TV was a start in this direction, but the past dozen years have witnessed technology revolutions in nearly every related field and consumer expectations have risen accordingly. Alternative delivery paths have proliferated. Receiving devices such as smartphones and tablets have proliferated. Consumers expect interactivity. Behind the scenes, major improvements have taken place in video and audio coding efficiency, while broadcast spectrum has become scarcer.

The role of standards

Invisible to consumers are the technical standards that enable solutions to broadcast TV’s challenges. Standards really provide the basis for fundamental shifts in technology because they ensure the interoperability and economies of scale that lead to innovation and market adoption. The standards for digital TV were developed beginning in the late 1980s and approved by the FCC 1996, and it took nearly a decade to move the market to widespread adoption.

As consumers came to expect access to content historically delivered by broadcast TV pretty much anytime, anywhere and device-agnostic, those involved in conceiving and writing applicable standards had to lead the way to a sustainable future. And achieving that future, meeting consumer expectations, meant that new standards had to be extensible, scalable, and adaptable to unforeseen developments.

These are the challenges that have been met by ATSC 3.0, which now has regulatory approval from the U.S. Federal Communication Commission for voluntary commercial services, clearing the way for actual trials in test markets to understand best practices for applying the ATSC 3.0 standards for the next-generation of broadcast TV and how consumers respond to new service offerings.

The process

The process for achieving the ATSC 3.0 suite of standards that enable a future-oriented, commercially viable business model for broadcast TV and commensurate consumer benefits is similar for most technical standards. I will not bore readers of The Broadcast Bridge with the minutiae of actual standards writing and approval. (I personally find it fascinating, but it’s not everyone’s top choice.) Suffice to say that it requires years of work by hundreds of dedicated individuals from the worlds of industry, academia, consultancy, public interest and policy, as well as sponsors, to develop the underlying concepts, architectures and features and hash out the standards to support them. The process basically requires a global consensus among all participants, who bring their collective expertise to bear on every detail of myriad technologies and how best to define them for commercial use in the real world.

This process more or less culminated in 2017 with approval of the bulk of ATSC 3.0 standards and led to the March 2018 approval of commercial licenses by the FCC in specific U.S. markets that will test current best practices for applying the standards and contribute to new ones.

Launching in the ‘real world’

As you read this article, two major trials are underway in “model markets” to test ATSC 3.0 services, consumer response to the offerings and also the simultaneous delivery of ATSC 1.0 which was mandated by the FCC for stations launching ATSC 3.0 services.

In January, Sinclair Broadcast Group and its partners announced that it would broadcast ATSC 3.0 signals in Dallas, Texas. This trial is viewed as a first step toward a national service launch in some or all of Sinclair’s 100 U.S. markets. The Pearl TV Business Alliance – a coalition of broadcast groups backing ATSC 3.0 – announced its Model Market project in Phoenix, Arizona, in concert with 10 local stations there. The two trials, and others such as the joint NAB-CTA ATSC 3.0 test station in Cleveland, Ohio, will exercise different business use cases that the system enables.

These ongoing trials are providing implementers and the ATSC 3.0 community with new insights on recommended practices for implementing the standard, a variety of business and use cases and consumer response to the enhanced services and content on offer. One of our key ATSC 3.0 initiatives going forward is to maintain dialogue between our group and early implementers to improve the standards when additional clarification is needed and help see that the future for broadcast TV is as bright as we envisioned.

Resulting benefits

The ATSC 3.0 standard enables broadcasters to explore many new business models and opportunities, including the long-coveted ability to establish a one-to-one relationship with individual consumers. The creation of hybrid over-the-air (OTA) and over-the-top (OTT) content based on ATSC 3.0 standards is really the first time that broadband and broadcast have been “married,” on a common IP backbone. If new consumer-facing value propositions create “stickiness,” and a competitive advantage, we are likely to see rapid adoption of ATSC 3.0.

With the marriage of broadcast and broadband, consumers will finally realize their evolving demand for access to content from any source on any device, anywhere, all with immersive audio, high-definition video, added services (including improvements in public emergency notifications) and interactivity. In fact, it is difficult to put into words the leap in sensory richness that ATSC 3.0 will enable.

To enjoy these advancements, consumers will need a “receiving device,” and various devices and form factors are expected to come to market. It could be a new ATSC 3.0-enabled TV, a box that feeds 3.0 to your current TV or a mobile device, or perhaps even an autonomous vehicle.

In 2018, after many years of dedicated work, participants in the standards development process for ATSC 3.0 will finally see the fruits of their labors in setting a 21st Century course for the evolution of broadcast TV that will revitalize the industry and bring consumers a plethora of delightful, sensory-rich benefits.

About the author

Madeleine Noland received her Bachelor of Music from the University of Massachusetts in 1989. She began her career in the television industry in 2004 with Backchannelmedia, Inc., an interactive television technology developer.In early 2013, Noland joined LG Electronics with a focus on development of industry standards and guidelines.Noland participates in a variety of industry organizations on behalf of LG, including the IEEE Broadcast Technology Society and has served in leadership roles within the ATSC 3.0 project. She is succeeding Triveni Digital’s Dr. Rich Chernock as ATSC Technology Group Chair. Noland also chairs the Guidelines Work Group within the Ultra HD Forum and the ATSC Advanced Emergency Alert Implementation Team.

She was the 2016 recipient of the prestigious ATSC Bernard J. Lechner Award for her leadership roles related to the development of the next-generation ATSC 3.0 suite of standards.

Let us know what you think…

Log-in or Register for free to post comments…

You might also like...

TV’s ‘Back to the Future’ Moment?

Philo T. Farnsworth was the original TV pioneer. When he transmitted the first picture from a camera to a receiver in another room in 1927, he exclaimed to technicians helping him, “There you are – electronic television!” What’s never been quoted but lik…

IP Showcase Returns to IBC2018

From theory to implementation, this second year of the IP Showcase and Theater at IBC2018 is should be on everyone’s schedule.

Google Leaves RDK Trailing with Android TV Operator Tier

Android TV is finally being adopted on a large scale by pay TV operators three years after its launch and seven years on from the original unveiling of its predecessor Google TV. One casualty could be the RDK (Reference Design…

Post NAB 2018 - A Different Perspective

Whether the exhibits and technology would represent more hype than promise was a key question going into NAB 2018. Attendees expected developments on ATSC 3.0 and the industry’s migration toward IP infrastructures. Perhaps most surprising was the high level of interest i…

2018 NAB Show Highlights Complex State of the Industry

Following numerous private conversations and panel discussions at the recent 2018 NAB Show, it’s become clear that broadcasters are being challenged like never before to hold the line on CapEx spending while delivering more content across their linear platforms. Because o…