IBC2018 Show Event Channel

Everything you need to know for the show and exhibitors.

Click here

DVEO Showing New ATSC 3.0 Version of Classic Demodulator-Receiver and Decoder

A new, full-featured, multichannel, off-air ATSC 3.0 professional receiver is designed for content monitoring and repurposing, and was recently used during the Korean Winter Olympics.

DVEO is now shipping an ATSC 3.0 version of the classic best-selling Verona 4 Tuner 8VSB frequency agile receiver-demodulator. The new TLV500E-ATSC 3.0 will be demonstrated at the 2018 NAB Show.

The broadcast quality, frequency agile system is a modular four-tuner ATSC 3.0 + 1.0 UHD/HD receiver-demodulator with an MPEG-2 (HD/SD), MPEG-4/H.264 and HEVC/H.265 decoder. It has five slots. Each slot can have an AC to DC power supply module or a tuner/decoder module. The typical application uses one AC to DC power supply and up to four tuner/decoder modules.

Each tuner/decoder module can have an RF tuner with ATSC 3.0 or ATSC 3.0 IP input. Video output is 12G/Quad 3G and 1.5G SDI digital format or HDMI, with embedded audio.

"The TLV500E-ATSC 3.0 is ideal for American, Canadian, and Mexican broadcasters who are making the much anticipated transition to ATSC 3.0," commented Laszlo Zoltan, Vice President of DVEO.

Let us know what you think…

Log-in or Register for free to post comments…

You might also like...

Essential Guide:  Video Over IP - Making It Work

Low latency networks and non-blocking switches are terms now appearing in mainstream broadcasting. But what do they mean? Why are they relevant? And how do we make Video over IP work?

Broadcast For IT - Part 18 - Quality Control

Quality Control is one of the many areas where IT and broadcast use similar terms, but the meaning is quite different. Whereas IT focuses on guaranteeing bit rates and packet delivery to improve quality of service and hence quality of…

Broadcast For IT - Part 17 - Compression Formats

The bewildering number of video and audio compression formats available is difficult for those new to the industry to come to terms with. For broadcast engineers and IT engineers to work effectively together, IT engineers must understand the formats used,…

Video Over IP - Making It Work - Part 3

Point to point connections dedicated to delivering video and audio signals have dominated the broadcast industry since the 1930’s. But migrating to IP is compelling engineers to think differently about packetized signal distribution. In this article we investigate the potential s…

Broadcast For IT - Part 16 - Video Compression

To deliver efficient media solutions IT engineers must be able to communicate effectively with broadcast engineers. In this series of articles, we present the most important topics in broadcasting that IT engineers must understand. Here, we look at compression, why,…