2018 NAB Show Event Channel

The #1 source of technology content in the broadcast & media industry, by the editors of The Broadcast Bridge - filtered by category.

Click here

Tascam Adds Dante Networking To Audio Interfaces

Tascam has added two new models to its popular line of audio interfaces that help streamline audio production. The products include new Line-Level-to-Dante and Dante-to-Line-Level interfaces.

Taking advantage of the Dante audio networking protocol and compatible devices, Tascam’s ML-32D and ML-16D interfaces allow audio engineers and systems integrators to quickly and easily connect 32 or 16 channels of audio between the analog domain and Dante-enabled digital components. These components include the Tascam DA-6400, SS-R250N, and SS-CDR250 multichannel audio recorders.

The ML-32D and ML-16D deliver pure Dante connectivity, without unnecessary features like mid-level microphone preamps, MADI and S/PDIF interfaces, and other little-used functions that add cost and complexity. Supporting Digital Audio at up to 24bit/96kHz, both units feature analog line level I/O via D-Sub connectors (8 on ML-32D and 4 on ML-16D) and feature front panel LED meters to display both signal level and overload for each active channel.

The Tascam ML-32D and ML-16D will carry an MSRP of $2,299.99 and $1,599.99 respectively and are scheduled to begin shipping in early 2018.

Let us know what you think…

Log-in or Register for free to post comments…

You might also like...

2018 NAB Show Highlights Complex State of the Industry

Following numerous private conversations and panel discussions at the recent 2018 NAB Show, it’s become clear that broadcasters are being challenged like never before to hold the line on CapEx spending while delivering more content across their linear platforms. Because o…

Understanding IP Networks - Production Crews and IP - Part 22

Broadcast television is the point where the creative arts and technology meet. It’s different from any other discipline as to operate at an optimum level, and get the best possible quality, artisans, producers, and creatives have a deeper technical u…

Setting Up New Audio Monitors in a Studio

When setting up new audio monitors in a studio, their placement is an important choice in the successful operation of the monitoring system. Since no two rooms sound the same, here are a few tips to make the installation easier.

Genelec Presents Immersive Audio Monitoring Paper at 2018 NAB Show

Immersive audio has long been promoted as the natural partner of new, enveloping video technologies. First there was stereoscopic 3D and now Ultra High Definition (UHD), for which spatial sound with a sensation of height as well as width and…

Getting Good Audio with Hidden Microphones

Sometimes — when boom or lavalier mics aren’t appropriate — engineers must record good audio with microphones hidden on a set. This can be a challenge. Here’s a look at how to hide microphones for maximum effect.